Introduction
Upgrading a computer system is very important in today’s technology-dominated world. Upgrading becomes even more important if it is a desktop. Laptops can also be upgraded, but they need to be sent to the manufacturer’s service center for proper and effective upgrading. For desktops, you can upgrade it at home using hardware and tools for upgrading. The necessary hardware and tools for upgrading often makes us confused as to what we should use and what we should not. Hardware engineers often make use of hardware and tools for upgrading the systems we have at home. So, if we have the same set of tools and awareness, we can do that too.
information
Screwdriver: This is one of the most important parts of the hardware and tools used for upgrading. Whether you are upgrading your processor or your RAM, or even attaching a new hard disk drive, you need the screwdriver in order to open the screws attached with the cabinet. Various computer cabinets might have different sizes of screws attached to them. So, it is better if you can get hold of a computer screwdriver toolset. These are available in all computer shops where computer hardware and tools used for upgrading are available.
A multi-meter for checking: Often, a multi-meter will be necessary to check whether a device is working properly or not. A multi-meter is thus an essential part of hardware and tools used for upgrading. Whenever you have issues with the SMPS for example, you need to check out the pins of the SMPS using this multi-meter. Even in other cases like HDD LED, Power LED, etc., we need to use the multi-meter.
additional information
A tester: A tester looks just like a screwdriver, but is actually used for testing the flow of electricity. Often, while upgrading or removing the computer parts we have chances of getting electrocuted due to the residual current within the system. Therefore, a tester plays a very important role among hardware and tools used for upgrading.
Try to keep a manual nearby: Other than the tools mentioned above, you need two more things. Firstly, you need the hardware components you wish to upgrade. And secondly, you will need the manual which came along with the accessory. This manual will help you in attaching the computer component properly. Various tips and instructions are also given in these manuals which can help you in a lot of ways.
Tips
Compatibility will be a huge factor answered by this manual. Often, people buy a computer accessory. But, after attaching the device to the computer, they may find that it is not functioning properly. This occurs if the compatibility problem is there. Hence, try to keep the device manual along with you. The device manual can even be downloaded from the Internet. You can download and take a printout of this device manual and use it when needed. It is better safe than sorry what we should remember while using hardware and tools for upgrading our systems. In case, you can’t upgrade your computer on your own, you should take some help from professionals. There are various companies who offer up gradation at a reasonable price. These companies can be found on the Internet.
